Cafago WW
ChicMe WW
ChicMe WW
ChicMe WW
ChicMe WW
Ivrose WW
Etihad Airways [CPS] WW
Cafago WW
Cafago WW

🏠 | 💻 PC | 🐧Linux |

My Debian Diary

  • Debian Manual
  • My first experience with Debian (RUS)
  • Debian_FAQ
  • How to use memorystick Linux
  • Virtual Windows 7 on Debian
  • How to use memorystick Linux
  • Virtual Windows 7 on Debian
  • Debian_FAQ
  • Intro

    If you are interested in something related to Debian Linux, you should probably read either my Debian Quick Start Guide or Debian FAQ

    This page is just my diary about the very first use of Debian Linux.

    Sincerely, Andrey Olegovich.


    As the basis for the guide, I chose an article Correct Debian Installation Previously, on a clean hard drive I allocated 20 GB for Debian and 6 GB for swap (how much space you really need to allocate, I have only an approximate concept, because Blue allocated 4 GB for swap, but it was on a laptop, and On a stationary I have 4 GB of RAM)

    I downloaded a small image of netinstall ia64 from the Debian website that disconnected all hard drives except one clean one. I tried to install. Mistake

    Missing operating system

    I decided that I chose the wrong architecture. I recorded another i386 image on cd-rw

    It became visible when loading.

    When loading, it was necessary to choose a country, city, keyboard layout - nothing complicated. Next, you had to select the functions for each section. (provided that the partition mode was selected manually). Those. if I want a swap of 6 GB and a system of 20 GB and not vice versa, I must indicate this.

    Entering a password for the superuser (in other words, the administrator) and a simple user is also easy, the main thing is do not write qwerty otherwise the Chinese will take over your server.

    When everything was established, I became the proud owner of a black screen and console.

    Fortunately, I remember the basic commands cd, ls, mkdir, mount

    Because with netinstall, apparently, almost nothing in the kit goes; even KDE could not be downloaded from the Internet.

    Downloading updates and other joys is led by something called aptitude.

    The file with the list of addresses from where this aptitude can download updates lies in / etc / apt / and is called sources.list

    To go to the directory / etc / apt / you need to type cd / etc / apt

    To open the sources.list file, you must first go to the directory and then type nano sources.list (you can write everything right away without going first)

    As I understand it, nano is an analog of notepad in Windows.

    I uncommented the line where the address http://ftp.debian.org was specified but because the computer cannot connect to the Internet yet

    aptitude update

    did not give a result.

    I tried to install pptp-linux from the disk (the path to the disk was originally opened in sources.list) - I inserted the disk with netinstall and typed

    aptitude install pptp-linux

    In response, 3 new packages were installed.

    tried again

    aptitude update

    No result

    I decided to download and install the xl2tpd package

    I downloaded it, but I still can’t install it

    I decided to edit the file

    / etc / network interfaces

    appended there

    allow-hotplug eth0 iface eth0 inet dhcp address netmask gateway

    Then updated the network settings with the command

    /etc/init.d/networking restart

    It didn’t help, still -

    Temporary error while trying to get 'ftp.debian.org' IP address

    I talked with Oleg, he said that for 4 GB of RAM you can not choose the i386 architecture because lacks the length of the name. The 32-bit architecture allows addressing 2 to 32 degrees bytes of memory, which is slightly less than 4 GB.

    UPD Michael believes that this is not the point, not just 4 GB of RAM but 3.8 will be used, and you can make a mistake only by choosing a set - amd64 instead of i386 with a real 32bit architecture.

    Reinstall, this time amd64

    I chose another network card eth1 at boot instead of eth0

    Internet has appeared.

    Managed to put Midnight Commander

    apt-get install mc

    And archivers

    apt-get install zip unzip p7zip bzip2

    I decided to make Russian in the console

    apt-get install console-cyrillic console-terminus

    It seems to be all set, but when I then gave the command


    The computer froze. I had to use a keyboard shortcut

    when pressed Alt + PrtScr sequentially pressed R E I S U B

    the computer rebooted. thank (http://my-debian.blogspot.com/2008/12/debianubuntu.html)

    I decided to put the iceweasel browser. I pre-registered the line in /etc/apt/sources.list

    deb http://mozilla.debian.net/ squeeze-backports iceweasel-release

    apt-get install iceweasel

    Received in response a message:

    Packages that have unsatisfied dependencies:

    iceweasel: Depends: libgtk2.0-0 (> = 2.10) but it will not be installed : Depends: xulrunner-10.0 (> = 10.0-1, etc.

    If you try to put one of these packages - the following will be required - I decided to unravel this chain

    One package - libpixman even managed to install, but on some

    libcairo2 has failed. T.O. manually put down all the required packages failed.

    In general, the browser is a complete file. I'll try to put x

    aptitude install x-window-system

    After the process has stopped I am writing


    The black screen on which you can move the mouse cursor In the upper left corner is the inscription root @ debian: ~ # (upper tilde) you can enter commands

    Moved with the mouse. He led the team. the question is up: what is this nonsense?

    Why is it necessary


    Alt + Ctrl + Backspace

    nothing has happened

    Had to reboot


    I decided to put a sound

    apt-cache search alsa

    The result is a huge list, in which it is unclear whether alsamixer is there or not.

    aptitude install alsa-utils alsa-base alsa-tools

    Something downloaded and sort of installed.

    I enter the team


    He turned on. I'm trying to configure something.

    I want to check whether the mp3 music will be played. Mounted a USB flash drive. There is no mp3 on it. I decided to unmount and realized that I did not know how. It turned out that I was making a mistake - instead of umount / mnt / flash1 I was writing unmount / mnt / flash1. Linux is an intuitive OS, especially for beginners.

    You must first exit the flash drive and then unmount. Which is similar to safe removal in Windows.

    Throw off a couple of songs on a flash drive. The film in .mkv and the holy image of Blue in a black olympic shirt will probably help.

    To understand where to write all these files, I used the command

    fdisk -l

    it lists the devices, shows where it starts and where each device ends, as well as the file system. This information was enough for me to understand that my disk for music films and other things is sda6

    I usually call these discs Free. I create such a section in mnt

    mkdir / mnt / free

    and mount sda6 there

    mount / dev / sda6 / mnt / free

    Mounted the disk. I created music, movies, photo folders on it and laid out files on them.

    Trying to watch a movie. For this I’m typing

    aptitude install Vlc

    The installation process has gone. A couple of times I had to choose yes. Everything was settled. I go to the folder where the movie is. Typing

    vlc movie_name

    I get an error.

    VLC is not supposed to be run as root. Sorry

    The error is clear. You need to log in as a simple user. By a simple enumeration of the teams I found the right one



    vlc / mnt / free / movies / movie_name

    Again a mistake. This time

    Blocked: call to unsetenv ("DBUS_ACTIVATION_ADRESS") and then a dozen more lines.

    What all this means I have no idea. I suspect that either there are no drivers on the video card, or any codecs.

    The moment is near when all this confusing OS will get bored so that you don’t want to do anything already.

    I try to put mplayer

    aptitude install mplayer

    It was established, but could not open the film. I try to open the song, it opens, but there is no sound.

    I try to put gnome

    aptitude install gnome-core gnome gdm

    Black screen and cursor again.

    I downloaded the driver from the amd site presumably for my video card. I downloaded the movie in .avi you never know with .mkv my system is not friends now. Threw on a computer with Debian.

    movie.avi also does not play

    Found the article gosha.me/node/126

    I install the compilation package

    apt-get install build-essential linux-headers - $ (uname -r)

    It’s generally horrible, what is it? How can you guess where to read before? In Windows, at least you can poke somewhere for a long time and find something. And this is just a brain stem. So put something from the ceiling.

    Then I go to the folder where I downloaded the driver and write

    CC = gcc-4.3 ./ driver name

    (I have realtec 4450)

    What is CC, why is it equal to gcc-4.3

    I did not install any gcc and SS did not install either.

    Nevertheless, some installation was made. I was even offered to agree to a license. Did startx no result. Because I can’t reboot.

    The result of installing the video card driver:

    X's do not work.

    There was a picture when playing the movie .avi and movie .mkv

    No sound. I'll try to put the driver on the audio. True, I don’t know what to choose - I have an integrated audio card. The motherboard is like asus p5q, but there are no drivers for Linux on the asus site, except for the BIOS. Some manuals.

    I try to do without firewood


    alsactl init

    In response, I found out that my audio card is unknown.

    Apparently you need to rebuild the kernel. I download the last stable with


    I read an article


    Called blue he said dial

    uname -a

    to find out the kernel version My kernel is debian 2.6.32-5 He said it was old. Need to upgrade. He also said, just in case, add to source.list

    deb http://ftp.ru.debian.org/debian/ squeeze main contrib non-free deb http://ftp.ru.debian.org/debian/ testing main contrib non-free

    to do

    apt-get update

    apt-get upgrade

    When upgrading the entire system, you will need to select languages and stuff again. I put new fashionable X

    apt-get install xfce4 slim

    During the installation, the Internet was cut off for a while and everything hung up at 86 percent. Blue suggested pressing Ctrl + c up Enter, but so far I have written about it and it all worked. Everything has been established. Writing


    I'll get into the X. I select "Use default settings" I want to start the browser, but this option is inactive. Came out of X by pressing

    Ctrl + Alt F1

    Changed the console to

    Alt + F2

    I put the browser

    apt-get install iceweasel

    Again, a message appears about packages that this time it is impossible to authenticate one of these packages my friend xulrunner-10.0 Install without checking. I go to X using

    Alt + F7

    The browser is working. I get out of the X

    Alt + Ctrl + F2

    I want to put skype

    apt-get install skype

    Error A candidate for installation was not found for the skype package. I downloaded skype from the site after specifying to the browser the directory to download - / home / andrey I went into the directory

    dpkg -i skype-debian_2.2.0.35-1

    (-i this is install, -r remount, --purge - complete cleanup)

    there were some difficulties with dependencies. I typed

    apt-get -f install

    then completely cleared of skype and set again

    We make sound. I type lspci to see a list of devices on the PCI bus. I went to alsamixer where there were 00 at the bottom of the columns and replaced it with MM; I raised everything to the maximum. No sound. It turned out everything was exactly the opposite, you need to do everywhere 00 and not MM then there is sound. Trying to turn on the movie

    mplayer / mnt / free / movies / title

    does not turn on. I am sitting under the root. I went to X (there I am also under the root. But the film started up, there is no sound). I want to see the broadcast of the Unix-Triumph match through a browser, I need an Adobe plugin

    apt-cache search flash

    One of the finds was the one that Adobe needed and installed it.

    apt-get install flashplugin-nonfree

    then I reboot the browser. The broadcast is visible. Triumph summed up. I want to install utorrent. I went to the site. Downloaded utorrent-server-3.0-25053.tar.gz Unzipped the command

    tar -zxvf utorrent-server-3.0-25053.tar.gz

    Another file appeared in the andrey folder


    Decided to apply dpkg -i

    dpkg -i utorrent-server-v3_0

    Got errors

    dpkg-split: error: read error utorrent-server-v3_0 /: This is a directory and so on

    Since this is a directory, I go into it.

    cd utorrent-server-v3_0


    Three files lie (or you can’t guess the directory anymore)

    docs utserver webui.zip

    I abandoned the idea of installing utorrent. I decided to put transmisson I downloaded from of. site. did dpgk -i then apt-get install transmission Opened the article

    http://habrahabr.ru/blogs/p2p/87287/ Created the user transmission without password adduser --disabled-password transmission I switch to this user

    su transmission

    (tried to switch through login but failed)

    I enter the team

    transmission-daemon -f

    team not found Decided to download ktorrent. This time the archive was .tar.bz2 unpacked using tar -xvjf

    Did dpkg -i and apt-get install ktorrent

    And o-miracle - it worked. My choice is ktorrent!

    I put the amarok audio player. To start it, you need to type amarok in the X in the terminal

    I put filezilla, created the folder / mnt / free / andreyolegovich_site to copy the site for editing pages there. I want to create a page where I will bring this text about installing debian. But since I'm sitting in the X from under andrey to write to the folder nothing happened. Need to bother with access rights. I already have no time to do this. I cannot transfer the task to tomorrow.

    The weekend is over. A brief summary. There is Debian. Under it, you can watch movies, listen to music and download torrents.


    I want to put firewood on the printer Brother DCP 7010 downloaded from the website brdcp7010lpr-2.0.1-1.i386.rpm it is not clear why I downloaded i386 but I don’t see any alternatives I read the instructions on the website It is written that I need to install ia32-libs first already installed. It remains to understand how to open .rpm Hang up - you can immediately download .deb and download it. But I could not unpack it due to the difference in architecture - which is what I expected.

    I downloaded brother-lpr-drivers-laser-_2.0.1-3-0ubuntu3_amd64.deb Unpacked. Got errors: No multiple dependencies. Manually install failed.

    However, the instructions on the site pkgs.org/ubuntu-10.10/ubuntu-multiverse-amd64 indicate that you first need to install a2ps, brother-cups-wrapper-laser, brother-lpr-drivers-common, ia32-libs, libc6-i386 I'll try set everything in order

    I downloaded a2ps_4.14-1.1_amd64.deb It also can not be installed normally. Writes a dependency error


    Recommends lpr, wdiff

    psutils in turn swears on dependence on brother-lpr-drivers-laser

    Download brother-lpr-drivers-common for ubuntu Unpacked, but when installing again, swears on dependencies It looks like they depend on each other in a circle. How to pose a riddle in this case, but Linux is an intuitive system. It is important to keep this in mind.

    brother-cups-wrapper-laser says that unless brother-lpr-drivers-common is configured it will not work

    Trying to install libc6-i386

    Again this mutual responsibility. There is nothing left but

    apt-get -f install

    Also advised by http://mydebianblog.blogspot.com/2006/11/debian-printing-via-cups_27.html

    Posted by

    aptitude install cupsys gs-esp foomatic-bin foo2zjs cups-pdf

    (apt-get in this case did not fit, I wonder what the difference is)

    A blue screen popped up asking me to configure the package. I need to specify the workgroup.

    I will write porosenok_petr

    Again, something is unpacked. typed in the browser

    http: // localhost: 631

    The CUSP window appeared. I did Add new printer. My brother 7010 decided on that. There, I had to enter the location and model data. How to choose a model from the list that was I do not know, left by default.

    I will try to install some .pdf reader and print from n


    Now .pdf files can be opened and even stretched. But for some reason they are tied to the upper left corner of the screen. Print until it worked. Reading page


    I read the page http://www.kraeg.ru/node/15 this is a repost from maydebian blog.

    On the advice from this page I typed

    aptitude install cupsys gs-esp foomatic-bin foo2zjs

    Nothing is installed. The printer has printed a test page. EPDFView does not refuse to print from .pdf, but the output is only blank sheets. I deleted (or maybe not, I made dpkg -r ePDFView) ePDFView and installed it, on the advice of Blue evince

    apt-get install evince

    I am now confused: when do I need to use dpkg -i and when only apt-get install?

    Print quality is poor, as if paper were stained.

    Now I’ll deal with folder permissions. I want to be able to download torrents in X and through filezilla also from under a simple user. did

    chmod 777 / mnt / free

    helps. I decided to edit the html page in nano. Now the blue font on a black background is unreadable. You need to find how to adjust the colors in nano. http://ubuntu-favorite-os.blogspot.com/2011/11/nano.html

    Alt + y

    the text has become white.

    Ctrl + k cuts the line where the cursor is.

    But the question is how to insert a piece from another text file into my place through nano so far above my competence. I'll try through the X. I put the text editor abiword

    apt-get install abiword

    abiword html file did not master put bluefish

    apt-get install bluefish

    He mastered (through X). True, the problem with the Russian language.

    Abiword also did not master Russian in a text file. I'll try to save in a different encoding.

    Apparently too much text - the buffer did not fit. Will have to parts.


    I want to delete the previously created directories hard1, hard2, hard3 and create an exchange for the disk with fat32 instead

    rm -r hard *

    mkdir / mnt / exchange

    chmod 777 exchange

    mount / dev / sda7 / mnt / exchange

    Now I can transfer files between OSes through this disk. I wonder if there are still file systems that are visible from both Windows and Debian. Fat32 has a file size limit that is too strong.


    I install the program for viewing geeqie images

    aptitude install geeqie


    Blue said the office could help with encoding. I'll try to put it.

    apt-get install libreoffice

    Something is being put. At the end I get a message.

    apt-get install pkg / experimental will now not only switch the candidate of package pkg to the version from the release experimental but also of all dependence of pkg if the current candidate can't satisfy a versioned depedency.

    - David Kalnischkies Fri, 03 Dec 2010 14:09:12 +0100

    / tmp / tmpVzAhfJ (END)

    Blue said press q

    Next ran the text

    apt-listchange and much more I do not have time to write Everything seems to be settled. But with the encoding, this did not help me in any way. Blue offers

    cat file.html | iconv -f cp1251 -t utf-8> new.html

    One way. Then open, edit, close.

    cat new.html | iconv -f utf-8 -t cp1251> file.html

    On the other side. And put it on the site. I check. Works.

    The next goal is to establish ftp - a connection between a desktop PC with Debian and a laptop with Windows 7

    Installed Debian on the laptop using this page. Everything works the same as on a stationary one. I note one interesting fact - I succeeded in installing ktorrent and amarok only the third time, during the installation a text message appeared from the developers or the system one, I had to press q but I did not know and pressed Ctrl + O and Ctrl + D until I realized that I was wrong .

    To connect to a non-existent ftp server, you need a network. I can use the cord, but since I'm driving around with the network anyway, I want to configure wifi. I go sequentially to the pages:

    http://wiki.debian.org/WiFi http://packages.debian.org/search?keywords=wireless-tools http://wiki.debian.org/NetworkManager http://packages.debian.org/squeeze/wireless-tools

    From what I read so far it became clear that you need to install wireless tools.

    apt-get install wireless-tools Established

    libc6 and libiw30 are already installed.

    apt-get install network-manager

    Something was installed received messages on a blue screen.

    The configuration file has been changed. New version of configuration file available / etc / default / rcS, but the version of the file on the system was changed locally

    and a choice of options

    install version from package save the installed local version show differences between versions show dec. m. vers. parallel launch a new shell to clarify the situation

    On the advice of Semyon chose the penultimate option

    Settings file changed Differences line by line # # # / etc / default / rcS # / etc / default / rcS

    This is the beginning, as I understand it, there are no changes in this line

    UTC = no | > # assume that the BIOS clock is set to UTC time (recommended) > UTC = yes

    I asked Semen - "Did he change my time?" (hereinafter bring the dialogue) O_o [0:46:10] Andrey Olegovich:? [0:46:14] Semen Dubina: Probably, you made the time in Windows display normally? [0:46:32] Andrey Olegovich: I myself did not do anything over time on the laptop [0:46:36 | Edited 0:46:56] Andrey Olegovich: on landline switched to London [0:46:47] Andrey Olegovich: because it was buggy [0:49:45] Andrey Olegovich: RAMRUN = no | RAMLOCK = n | # mount / run / lock as a tmpfs (separately from / run) > RAMLOCK = yes > > # mount / run / shm as a tmpfs (separately from / run) > RAMSHM = yes [0:49:49] Semen Dubina: Better update the file ... And set the time for your region. Glitches due to the fact that the real time was less than the time it took to create the files ... [0:50:14] Andrey Olegovich: ok [0:50:31] Semen Dubina: You can just wait three hours, when the time equals with the greenwich, or you can score the normal time in the BIOS ... [0:50:34] Andrey Olegovich: ie i choose [0:50:43] Andrey Olegovich: install the version from the package [0:50:45] Andrey Olegovich: as I understand it [0:50:46] Andrey Olegovich:? [0:51:29] Semen Dubina: Yes. The package builder normally selected the configuration. [0:52:17] Semen Dubina: If glitches start, set the time in the BIOS in GMT, but rather, synchronize with some ntp servers. [0:52:34] Andrey Olegovich: now I will try [0:53:19] Semen Dubina: Does Windows stand with Linux? [0:59:47] Andrey Olegovich: yes [1:00:47] Semen Dubina: Then forget about the correct display of time in Windows, it changes it in the system clock, and does not count from them ...

    Selected the option "Install the version from the package." Something has settled.

    Blue said run

    apt-get install network-manager-gnome

    I don’t understand, and here is gnome when I have xfce4, but because I have no other options. Something is being put (the main thing is not to forget about q). It is established. Then from the X.

    # nm-applet

    Error cannot open display: I go to X. There is also a mistake from the root

    : failed to connect to the configuration server most often this is caused by the absence of the D-Bus session bus service or its incorrect settings

    From user error

    nm-applet: 6634): Gtk-WARNING **: cannot open display:

    Blue went to bed. I read on the site that they recommend wicd for xfce4

    apt-get install wicd

    Wicd is installed. Appeared among the menu items "Internet". He pulled out the power cord. Wicd does not see wireless networks (And they are). I am doing a reboot.

    Connection icons appeared in the corner of the screen. Just in case, I’m doing it.

    apt-get remove network-manager-gnome

    And then reboot

    One of the icons is missing. I hover over the second one, select "Connect." - No wireless networks found -

    On the advice of http://www.linux.org.ru/forum/general/5878587, set the value wlan0 in the Wireless interface field. Networks appeared I try to connect to my own, but it does not work.

    On the advice of http://kuklin-s.livejournal.com/49240.html deleted wicd apt-get remove wicd apt-get autoremove apt-get remove network-manager apt-get autoremove reboot

    Now there is no Internet via cable. And there is wifi. I will count for a local victory.

    With ftp server has so far delayed, because You can do with ssh for now. I decided to put a virtual machine on the laptop and turn on Windows 7 in it. The WB is installed but does not want to work. A lengthy inspection of the forums did not produce results. I try to put it on a PC and record the entire process.

    apt-get install virtualbox

    Starting VirtualBox kernel modulesNo suitable module for running kernel found ... failed! failed! invoke-rc.d: initscript virtualbox, action "restart" failed. Triggers for python-central are processed ... The virtualbox-dkms package (4.1.10-dfsg-1) is configured ... Loading new virtualbox-4.1.10 DKMS files ... First Installation: checking all kernels ...

    debian: / home / andreyolegovich_ru / PC # apt-get install virtualbox

    Reading package lists ... Done Building a dependency tree Reading status information ... Done The following additional packages will be installed:

    dkms libcurl3 libvncserver0 linux-headers-3.2.0-2-amd64 linux-headers-3.2.0-2-common linux-headers-amd64 linux-kbuild-3.2 virtualbox-dkms virtualbox-qt Suggested packages: libvncserver0-dbg virtualbox-guest-additions-iso vde2 NEW packages to be installed: dkms libcurl3 libvncserver0 linux-headers-3.2.0-2-amd64 linux-headers-3.2.0-2-common linux-headers-amd64 linux-kbuild-3.2 virtualbox virtualbox-dkms virtualbox-qt updated 0, installed 10 new packages, 0 packages were marked for deletion, and 88 packages were not updated. Need to download 23.5 MB / 27.9 MB of archives. After this operation, the amount of occupied disk space will increase by 97.8 MB. Want to continue [D / n]? D

    Received: 1 http://ftp.ru.debian.org/debian/ testing / main libcurl3 amd64 7.24.0-1 [332 kB] Received: 2 http://ftp.ru.debian.org/debian/ testing / main libvncserver0 amd64 [242 kB] Received: 3 http://ftp.ru.debian.org/debian/ testing / main virtualbox amd64 4.1.10-dfsg-1 [15.8 MB] Received: 4 http://ftp.ru.debian.org/debian/ testing / main virtualbox-dkms all 4.1.10-dfsg-1 [693 kB] Received: 5 http://ftp.ru.debian.org/debian/ testing / main virtualbox-qt amd64 4.1.10-dfsg-1 [6421 kB] Received 23.5 MB in 19s (1201 kB / s) Selecting previously unselected package libcurl3. (Reading the database ... currently 125,666 files and directories are installed.) The package libcurl3 is unpacked (from the file ... / libcurl3_7.24.0-1_amd64.deb) ... Selecting previously unselected package dkms. The dkms package is unpacked (from the file ... / dkms_2.2.0.3-1_all.deb) ... Selecting previously unselected package libvncserver0. The package libvncserver0 is unpacked (from the file ... / libvncserver0_0.9.8.2-2_amd64.deb) ... Selecting previously unselected package linux-headers-3.2.0-2-common. The linux-headers-3.2.0-2-common package is unpacked (from the file ... / linux-headers-3.2.0-2-common_3.2.12-1_amd64.deb) ... Selecting previously unselected package linux-kbuild-3.2. The package linux-kbuild-3.2 is unpacked (from the file ... / linux-kbuild-3.2_3.2.7-2_amd64.deb) ... Selecting previously unselected package linux-headers-3.2.0-2-amd64. The package linux-headers-3.2.0-2-amd64 is unpacked (from the file ... / linux-headers-3.2.0-2-amd64_3.2.12-1_amd64.deb) ... Selecting previously unselected package linux-headers-amd64. The linux-headers-amd64 package is unpacked (from the file ... / linux-headers-amd64_3.2 + 44_amd64.deb) ... Selecting previously unselected package virtualbox. The virtualbox package is unpacked (from the file ... / virtualbox_4.1.10-dfsg-1_amd64.deb) ...

    Selecting previously unselected package virtualbox-dkms. The virtualbox-dkms package is unpacked (from the file ... / virtualbox-dkms_4.1.10-dfsg-1_all.deb) ... Selecting previously unselected package virtualbox-qt. The virtualbox-qt package is unpacked (from the file ... / virtualbox-qt_4.1.10-dfsg-1_amd64.deb) ... Triggers for man-db are being processed ... Triggers are processed for menu ... Triggers for gnome-menus are being processed ... Triggers for desktop-file-utils are being processed ... Triggers for shared-mime-info are being processed ... Unknown media type in type 'all / all' Unknown media type in type 'all / allfiles' Unknown media type in type 'uri / mms' Unknown media type in type 'uri / mmst' Unknown media type in type 'uri / mmsu' Unknown media type in type 'uri / pnm' Unknown media type in type 'uri / rtspt' Unknown media type in type 'uri / rtspu' Unknown media type in type 'interface / x-winamp-skin' Triggers for hicolor-icon-theme are being processed ... The libcurl3 package (7.24.0-1) is configured ... Configuring the dkms package ( ... The package libvncserver0 ( is configured ... The linux-headers-3.2.0-2-common package (3.2.12-1) is configured ... The linux-kbuild-3.2 package (3.2.7-2) is configured ... The linux-headers-3.2.0-2-amd64 package (3.2.12-1) is configured ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-2-amd64 Configuring the linux-headers-amd64 package (3.2 + 44) ... The virtualbox package (4.1.10-dfsg-1) is configured ...

    Stopping VirtualBox kernel modules. Starting VirtualBox kernel modulesNo suitable module for running kernel found ... failed! failed! invoke-rc.d: initscript virtualbox, action "restart" failed.

    Triggers for python-central are being processed ... The virtualbox-dkms package (4.1.10-dfsg-1) is configured ... Loading new virtualbox-4.1.10 DKMS files ... First Installation: checking all kernels ... Building only for 3.2.0-2-amd64 Building initial module for 3.2.0-2-amd64 Done vboxdrv: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-2-amd64/updates/dkms/ vboxnetadp.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-2-amd64/updates/dkms/

    vboxnetflt.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-2-amd64/updates/dkms/ vboxpci.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-2-amd64/updates/dkms/

    depmod ..... DKMS: install completed. Stopping VirtualBox kernel modules. Starting VirtualBox kernel modules. The virtualbox-qt package (4.1.10-dfsg-1) is configured ... Triggers are processed for menu ... Next, follow the instructions from http://wiki.debian.org/VirtualBox doing the following debian manipulations: / home / andreyolegovich_ru / PC # uname -r 3.2.0-2-amd64 debian: / home / andreyolegovich_ru / PC # aptitude install linux-headers-3.2.0-2-amd64 No packages will be installed, updated, or uninstalled. 0 packages updated, 0 new ones installed, 0 packages marked for deletion, and 88 packages not updated. You need to get 0 B archives. After unpacking, 0 B will be occupied.

    debian: / home / andreyolegovich_ru / PC # nano /etc/apt/sources.list In the sources.list file, I added the line deb http://backports.debian.org/debian-backports squeeze-backports main


    debian: / home / andreyolegovich_ru / PC # aptitude update

    Ign http://deb.opera.com stable InRelease Ign http://ftp.ru.debian.org squeeze InRelease Receive: 1 http://ftp.ru.debian.org squeeze-updates InRelease [114 kB] Hit http://deb.opera.com stable Release.gpg Receive: 2 http://security.debian.org squeeze / updates InRelease [87.8 kB] Receive: 3 http://backports.debian.org squeeze-backports InRelease [78.5 kB] Hit http://deb.opera.com stable release Ign http://mozilla.debian.net squeeze-backports InRelease Hit http://deb.opera.com stable / non-free amd64 Packages Get: 4 http://mozilla.debian.net squeeze-backports Release.gpg [828 B] Ign http://deb.opera.com stable / non-free TranslationIndex Hit http://mozilla.debian.net squeeze-backports Release Ign http://mozilla.debian.net squeeze-backports Release Receive: 5 http://ftp.ru.debian.org testing InRelease [185 kB] Ign http://mozilla.debian.net squeeze-backports / iceweasel-release amd64 Packages / DiffIndex Ign http://mozilla.debian.net squeeze-backports / iceweasel-release TranslationIndex Receive: 6 http://security.debian.org squeeze / updates / main Sources [72.7 kB] Get: 7 http://backports.debian.org squeeze-backports / main amd64 Packages [403 kB] Get: 8 http://security.debian.org squeeze / updates / main amd64 Packages [216 kB] Hit http://ftp.ru.debian.org squeeze Release.gpg Hit http://mozilla.debian.net squeeze-backports / iceweasel-release amd64 Packages Ign http://deb.opera.com stable / non-free Translation-ru_RU Hit http://ftp.ru.debian.org squeeze-updates / main Sources / DiffIndex Hit http://ftp.ru.debian.org squeeze-updates / main amd64 Packages / DiffIndex Ign http://ftp.ru.debian.org squeeze-updates / main TranslationIndex Ign http://deb.opera.com stable / non-free Translation-en Ign http://security.debian.org squeeze / updates / main TranslationIndex Ign http://deb.opera.com stable / non-free Translation-en Hit http://ftp.ru.debian.org squeeze Release Get: 9 http://ftp.ru.debian.org testing / main amd64 Packages / DiffIndex [7876 B] Hit http://ftp.ru.debian.org testing / contrib amd64 Packages / DiffIndex Get: 10 http://ftp.ru.debian.org testing / non-free amd64 Packages / DiffIndex [4645 B] Ign http://ftp.ru.debian.org testing / contrib TranslationIndex

    Get: 11 http://ftp.ru.debian.org testing / main TranslationIndex [2223 B] Ign http://ftp.ru.debian.org testing / non-free TranslationIndex Receive: 12 http://ftp.ru.debian.org squeeze-updates / main amd64 Packages [13.7 kB] Ign http://mozilla.debian.net squeeze-backports / iceweasel-release Translation-en_US Ign http://mozilla.debian.net squeeze-backports / iceweasel-release Translation-en Hit http://ftp.ru.debian.org squeeze / main Sources Hit http://ftp.ru.debian.org squeeze / main amd64 Packages Hit http://ftp.ru.debian.org squeeze / contrib amd64 Packages Hit http://ftp.ru.debian.org squeeze / non-free amd64 Packages Ign http://ftp.ru.debian.org squeeze / contrib TranslationIndex Hit http://ftp.ru.debian.org squeeze / main TranslationIndex Ign http://ftp.ru.debian.org squeeze / non-free TranslationIndex Ign http://backports.debian.org squeeze-backports / main TranslationIndex Ign http://mozilla.debian.net squeeze-backports / iceweasel-release Translation-en Get: 13 http://ftp.ru.debian.org testing / main amd64 2012-03-31-1412.38.pdiff [558 B] Get: 14 http://ftp.ru.debian.org testing / non-free amd64 2012-04-01-0210.44.pdiff [2015 B] Get: 15 http://ftp.ru.debian.org testing / main amd64 2012-03-31-1412.38.pdiff [558 B] Receive: 16 http://ftp.ru.debian.org testing / contrib Translation-en [36,2 kB] Hit http://ftp.ru.debian.org testing / main Translation-ru Receive: 17 http://ftp.ru.debian.org testing / main Translation-en [3795 kB] Ign http://security.debian.org squeeze / updates / main Translation-ru_RU Ign http://security.debian.org squeeze / updates / main Translation-en Ign http://security.debian.org squeeze / updates / main Translation-en Ign http://backports.debian.org squeeze-backports / main Translation-ru_RU Get: 18 http://ftp.ru.debian.org testing / non-free amd64 2012-04-01-0210.44.pdiff [2015 B] Ign http://backports.debian.org squeeze-backports / main Translation-ru Ign http://backports.debian.org squeeze-backports / main Translation-en Receive: 19 http://ftp.ru.debian.org testing / non-free Translation-en [63.5 kB] Hit http://ftp.ru.debian.org squeeze / main Translation-ru Get: 20 http://ftp.ru.debian.org testing / main amd64 2012-04-01-0210.44.pdiff [32.7 kB] Get: 21 http://ftp.ru.debian.org testing / main amd64 2012-04-01-0210.44.pdiff [32.7 kB] Ign http://ftp.ru.debian.org squeeze-updates / main Translation-ru_RU Ign http://ftp.ru.debian.org squeeze-updates / main Translation-ru Ign http://ftp.ru.debian.org squeeze-updates / main Translation-en Ign http://ftp.ru.debian.org testing / contrib Translation-ru_RU Ign http://ftp.ru.debian.org testing / contrib Translation-en Ign http://ftp.ru.debian.org testing / non-free Translation-ru_RU Ign http://ftp.ru.debian.org testing / non-free Translation-ru Ign http://ftp.ru.debian.org squeeze / contrib Translation-en_US Ign http://ftp.ru.debian.org squeeze / contrib Translation-en Ign http://ftp.ru.debian.org squeeze / contrib Translation-en Ign http://ftp.ru.debian.org squeeze / non-free Translation-ru_RU Ign http://ftp.ru.debian.org squeeze / non-free Translation-en Ign http://ftp.ru.debian.org squeeze / non-free Translation-en Fetched 5117 kB in 5s (875 kB / s) W: GPG error: http://mozilla.debian.net squeeze-backports Release: The following signatures cannot be verified because the public key is not available: NO_PUBKEY 85A3D26506C4AE2A W: Duplicate sources.list entry http://ftp.ru.debian.org/debian/ squeeze / main amd64 Packages (/var/lib/apt/lists/ftp.ru.debian.org_debian_dists_squeeze_main_binary-amd64_Packages)

    Current status: 97 updated [+9], 11164 new [+76]. W: GPG error: http://mozilla.debian.net squeeze-backports Release: The following signatures cannot be verified because the public key is not available: NO_PUBKEY 85A3D26506C4AE2A

    Tried to swap shell with chsh command. As a result, root access was lost. andrey @ debian: / usr / bin $ login login: Cannot possibly work without effective root andrey @ debian: / usr / bin $ su Password: Cannot execute / usr / bin / csh: No such file or directory

    Firstly I've booted in recovery mod, installed csh, then installed sudo (I've never used it before, and do not know how to use it now). It did not help. Then I've booted in recovery mod again and changed shells for root and for andrey with usermod -s / bin / bash root. Now I can use su as it was before. I think it was not a good idea to use csh.

    Вы нашли то, что искали на сайте?

    Или оцените по десятибальной шкале

    Если сайт не помог, извиняемся за потраченное время - хочу заверить, что мы стараемся не попадать в нерелевантные запросы, но тем не менее не всегда успеваем обновлять ключевые слова. Ну и контролировать поисковую выдачу, конечно, невозможно.

    Например: у нас есть статья про аэропорт Хельсинки и про аэропорт Риги но в выдаче по Риге всё равно статья про Хельсинки.

    Если статья Вам помогла, нажимайте ДА. Так мы поймём, что переделывать её не нужно.

    Занятно наблюдать в вебвизоре, как люди копируют текст, например вежливого отказа в трудоустройстве на английском но игнорируют кнопку ДА.

    Сделаем поиск лучше!

    Контакты и сотрудничество:
    Рекомендую наш хостинг beget.ru
    Пишите на info@urn.su если Вы:
    1. Хотите написать статью для нашего сайта или перевести статью на свой родной язык.
    2. Хотите разместить на сайте рекламу, подходящуюю по тематике.
    3. Реклама на моём сайте имеет максимальный уровень цензуры. Если Вы увидели рекламный блок недопустимый для просмотра детьми школьного возраста, вызывающий шок или вводящий в заблуждение - пожалуйста свяжитесь с нами по электронной почте
    4. Нашли на сайте ошибку, неточности, баг и т.д. ... .......
    5. Статьи можно расшарить в соцсетях, нажав на иконку сети: